Linux version 2.6.8.1-pa11-tulip (varenet@gropaf) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #4 SMP Tue May 3 20:58:50 CEST 2005 FP[0] enabled: Rev 1 Model 16 The 64-bit Kernel has started... Determining PDC firmware type: 64 bit PAT. model 00005c90 00000491 00000000 00000002 1edb9329 100000f0 00000008 000000b2 000000b2 vers 00000204 CPUID vers 17 rev 9 (0x00000229) capabilities 0x1 model 9000/800/L1000-44 Memory Ranges: 0) Start 0x0000000000000000 End 0x00000000efffffff Size 3840 Mb 1) Start 0x00000010f0000000 End 0x00000010ffffffff Size 256 Mb Total Memory: 4096 Mb On node 0 totalpages: 983040 DMA zone: 983040 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 On node 1 totalpages: 65536 DMA zone: 65536 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 SMP: bootstrap CPU ID is 0 Built 2 zonelists Kernel command line: root=/dev/sdc4 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux PID hash table entries: 16 (order 4: 256 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 4194304k available Calibrating delay loop... 874.49 BogoMIPS Mount-cache hash table entries: 256 (order: 0, 4096 bytes) Brought up 1 CPUs CPU0: online domain 0: span 3 groups: 1 2 CPU1: offline domain 0: span 3 groups: 2 1 NET: Registered protocol family 16 Searching for devices... Found devices: 1. Rhapsody DC- 440 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5c9, 0x00004 } 2. Rhapsody DC- 440 at 0xfffffffffffa6000 [166] { 0, 0x0, 0x5c9, 0x00004 } 3. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b } 4. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a } 5. Elroy PCI Bridge at 0xfffffffffed32000 [0/1] { 13, 0x0, 0x782, 0x0000a } 6. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a } 7. Elroy PCI Bridge at 0xfffffffffed36000 [0/3] { 13, 0x0, 0x782, 0x0000a } 8. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a } 9. Elroy PCI Bridge at 0xfffffffffed3a000 [0/5] { 13, 0x0, 0x782, 0x0000a } 10. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a } 11. Elroy PCI Bridge at 0xfffffffffed3e000 [0/7] { 13, 0x0, 0x782, 0x0000a } 12. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x095, 0x00009 } Enabling PDC_PAT chassis codes support. Releasing cpu 1 now, hpa=fffffffffffa6000 FP[1] enabled: Rev 1 Model 16 CPU(s): 2 x PA8500 (PCX-W) at 440.000000 MHz SBA found Astro 2.1 at 0xfffffffffed00000 lba version TR3.0 (0x4) found at 0xfffffffffed30000 lba version TR3.0 (0x4) found at 0xfffffffffed32000 lba version TR3.0 (0x4) found at 0xfffffffffed34000 NOTICE: Enabling PCI Arbitration lba version TR3.0 (0x4) found at 0xfffffffffed36000 NOTICE: Enabling PCI Arbitration lba version TR3.0 (0x4) found at 0xfffffffffed38000 lba version TR3.0 (0x4) found at 0xfffffffffed3a000 NOTICE: Enabling PCI Arbitration lba version TR3.0 (0x4) found at 0xfffffffffed3c000 NOTICE: Enabling PCI Arbitration lba version TR3.0 (0x4) found at 0xfffffffffed3e000 NOTICE: Enabling PCI Arbitration SCSI subsystem initialized unwind_init: start = 0x103cf360, end = 0x103eb3d0, entries = 7175 Performance monitoring counters enabled for Rhapsody DC- 440 Soft power switch support not available. Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled ttyS0 at MMIO 0xfffffffff8000000 (irq = 132) is a 16550A ttyS1 at MMIO 0xfffffffff8000008 (irq = 132) is a 16550A ttyS2 at MMIO 0xfffffffff8000010 (irq = 132) is a 16550A ttyS3 at MMIO 0xfffffffff8006000 (irq = 133) is a 16550A ttyS4 at MMIO 0xfffffffff8006008 (irq = 133) is a 16550A Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: no phy info, aborting mtable build tulip0: MII transceiver #1 config 1000 status 782d advertising 0061. eth0: Digital DS21143 Tulip rev 65 at 0xfffffffff8007000, 00:10:83:FC:42:29, IRQ 128. tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip1: MII transceiver #1 config 3100 status 7849 advertising 0101. tulip1: Advertising 01e1 on PHY 1, previously advertising 0101. eth1: Digital DS21143 Tulip rev 65 at 0xfffffffffa040000, 00:10:83:F6:6E:55, IRQ 384. sym0: <896> rev 0x5 at pci 0000:00:01.0 irq 129 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18k Using anticipatory io scheduler sym1: <896> rev 0x5 at pci 0000:00:01.1 irq 130 sym1: No NVRAM, ID 7, Fast-40, SE, parity checking sym1: SCSI BUS has been reset. sym1: SCSI BUS mode change from SE to SE. scsi1 : sym-2.1.18k sym1: SCSI BUS has been reset. Vendor: SEAGATE Model: ST39102LC Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 sym1:0:0: tagged command queuing enabled, command queue depth 16. scsi(1:0:0:0): Beginning Domain Validation sym1:0: wide asynchronous. sym1:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15) scsi(1:0:0:0): Domain Validation skipping write tests scsi(1:0:0:0): Ending Domain Validation Vendor: SEAGATE Model: ST39102LC Rev: 7C03 Type: Direct-Access ANSI SCSI revision: 02 sym1:2:0: tagged command queuing enabled, command queue depth 16. scsi(1:0:2:0): Beginning Domain Validation sym1:2: wide asynchronous. sym1:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15) scsi(1:0:2:0): Domain Validation skipping write tests scsi(1:0:2:0): Ending Domain Validation sym2: <875> rev 0x14 at pci 0000:00:02.0 irq 130 sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: SCSI BUS has been reset. scsi2 : sym-2.1.18k Vendor: SEAGATE Model: ST19171N Rev: HP06 Type: Direct-Access ANSI SCSI revision: 02 sym2:0:0: tagged command queuing enabled, command queue depth 16. scsi(2:0:0:0): Beginning Domain Validation sym2:0: wide asynchronous. sym2:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15) scsi(2:0:0:0): Domain Validation skipping write tests scsi(2:0:0:0): Ending Domain Validation Vendor: SEAGATE Model: ST39102LC Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 sym2:2:0: tagged command queuing enabled, command queue depth 16. scsi(2:0:2:0): Beginning Domain Validation sym2:2: wide asynchronous. sym2:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15) scsi(2:0:2:0): Domain Validation skipping write tests scsi(2:0:2:0): Ending Domain Validation sym3: <875> rev 0x14 at pci 0000:00:02.1 irq 131 sym3: No NVRAM, ID 7, Fast-20, SE, parity checking sym3: SCSI BUS has been reset. scsi3 : sym-2.1.18k sym3:2:0:phase change 2-6 6@00276368 resid=5. sym3: unexpected disconnect sym3:2:0:phase change 2-6 6@00276368 resid=5. sym3: unexpected disconnect sym3:2:0:phase change 2-6 6@00276368 resid=5. sym3: unexpected disconnect SCSI device sda: 17783112 512-byte hdwr sectors (9105 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 SCSI device sdb: 17781521 512-byte hdwr sectors (9104 MB) SCSI device sdb: drive cache: write through sdb: unknown partition table Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0 SCSI device sdc: 17783112 512-byte hdwr sectors (9105 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 sdc4 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 SCSI device sdd: 17783112 512-byte hdwr sectors (9105 MB) SCSI device sdd: drive cache: write back sdd: unknown partition table Attached scsi disk sdd at scsi2, channel 0, id 2, lun 0 mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 1980.000 MB/sec 8regs_prefetch: 1524.000 MB/sec 32regs : 1868.000 MB/sec 32regs_prefetch: 1624.000 MB/sec raid5: using function: 8regs (1980.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 192Kbytes TCP: Hash tables configured (established 131072 bind 43690) NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: Badness in smp_call_function at arch/parisc/kernel/smp.c:342 Backtrace: [<0000000010114f50>] dump_stack+0x18/0x28 [<00000000101204d4>] smp_call_function+0x4f4/0x500 [<0000000010113f84>] flush_data_cache+0x34/0x60 [<0000000010112c9c>] free_initmem+0x7c/0x4a0 [<0000000010110370>] init+0x1a8/0x500 [<000000001010647c>] ret_from_kernel_thread+0x24/0x38 244k freed Adding 1952760k swap on /dev/sdc3. Priority:-1 extents:1 EXT3 FS on sdc4, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdc2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. eth1: Setting full-duplex based on MII#1 link partner capability of 41e1. eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. Clock: inserting leap second 23:59:60 UTC cat /proc/cpuinfo processor : 0 cpu family : PA-RISC 2.0 cpu : PA8500 (PCX-W) cpu MHz : 440.000000 model : 9000/800/L1000-44 model name : Rhapsody DC- 440 hversion : 0x00005c90 sversion : 0x00000491 I-cache : 512 KB D-cache : 1024 KB (WB, 0-way associative) ITLB entries : 160 DTLB entries : 160 - shared with ITLB bogomips : 874.49 software id : 517706537 processor : 1 cpu family : PA-RISC 2.0 cpu : PA8500 (PCX-W) cpu MHz : 440.000000 model : 9000/800/L1000-44 model name : Rhapsody DC- 440 hversion : 0x00005c90 sversion : 0x00000491 I-cache : 512 KB D-cache : 1024 KB (WB, 0-way associative) ITLB entries : 160 DTLB entries : 160 - shared with ITLB bogomips : 874.49 software id : 517706537 cat /proc/interrupts CPU00 CPU01 64: 331590935 331589964 PARISC-CPU timer 65: 45918 61300 PARISC-CPU IPI 66: 137413 0 PARISC-CPU IO-SAPIC00-L0 67: 0 30 PARISC-CPU IO-SAPIC00-L1 68: 151518 0 PARISC-CPU IO-SAPIC00-L2 69: 0 43 PARISC-CPU IO-SAPIC00-L3 70: 221 0 PARISC-CPU IO-SAPIC00-L4 71: 0 0 PARISC-CPU IO-SAPIC00-L5 72: 64392 0 PARISC-CPU IO-SAPIC04-L0 128: 137413 0 IO-SAPIC00 eth0 129: 0 30 IO-SAPIC00 sym53c8xx 130: 151518 0 IO-SAPIC00 sym53c8xx, sym53c8xx 131: 0 43 IO-SAPIC00 sym53c8xx 132: 221 0 IO-SAPIC00 serial 384: 64392 0 IO-SAPIC04 eth1 cat /proc/iomem 00000000-efffffff : System RAM 00000000-000009ff : PDC data (Page Zero) 00100000-003c6fff : Kernel code 003c7000-0056ed73 : Kernel data 10f0000000-10ffffffff : System RAM fffffff804000000-fffffff87fffffff : LBA GMMIO fffffff884000000-fffffff8ffffffff : LBA GMMIO fffffff904000000-fffffff97fffffff : LBA GMMIO fffffff984000000-fffffff9ffffffff : LBA GMMIO fffffffa04000000-fffffffa7fffffff : LBA GMMIO fffffffa84000000-fffffffaffffffff : LBA GMMIO fffffffb04000000-fffffffb7fffffff : LBA GMMIO fffffffb84000000-fffffffbffffffff : LBA GMMIO fffffffff8000000-fffffffff87fffff : LBA LMMIO fffffffff8000000-fffffffff8000fff : 0000:00:04.0 fffffffff8000000-fffffffff8000007 : serial fffffffff8000008-fffffffff800000f : serial fffffffff8000010-fffffffff8000017 : serial fffffffff8001000-fffffffff8001fff : 0000:00:02.1 fffffffff8001000-fffffffff8001fff : sym53c8xx fffffffff8002000-fffffffff8003fff : 0000:00:01.0 fffffffff8002000-fffffffff8003fff : sym53c8xx fffffffff8004000-fffffffff8005fff : 0000:00:01.1 fffffffff8004000-fffffffff8005fff : sym53c8xx fffffffff8006000-fffffffff8006fff : 0000:00:05.0 fffffffff8006000-fffffffff8006007 : serial fffffffff8006008-fffffffff800600f : serial fffffffff8007000-fffffffff80073ff : 0000:00:00.0 fffffffff8007000-fffffffff80073ff : tulip fffffffff8008000-fffffffff80083ff : 0000:00:01.0 fffffffff8008000-fffffffff80083ff : sym53c8xx fffffffff8009000-fffffffff80093ff : 0000:00:01.1 fffffffff8009000-fffffffff80093ff : sym53c8xx fffffffff800a000-fffffffff800a0ff : 0000:00:02.1 fffffffff800a000-fffffffff800a0ff : sym53c8xx fffffffff8020000-fffffffff80200ff : 0000:00:02.0 fffffffff8020000-fffffffff80200ff : sym53c8xx fffffffff8040000-fffffffff8040fff : 0000:00:02.0 fffffffff8040000-fffffffff8040fff : sym53c8xx fffffffff8800000-fffffffff8ffffff : LBA LMMIO fffffffff9000000-fffffffff97fffff : LBA LMMIO fffffffff9800000-fffffffff9ffffff : LBA LMMIO fffffffffa000000-fffffffffa7fffff : LBA LMMIO fffffffffa000000-fffffffffa03ffff : 0000:20:00.0 fffffffffa040000-fffffffffa0403ff : 0000:20:00.0 fffffffffa040000-fffffffffa0403ff : tulip fffffffffa800000-fffffffffaffffff : LBA LMMIO fffffffffb000000-fffffffffb7fffff : LBA LMMIO fffffffffb800000-fffffffffbffffff : LBA LMMIO fffffffffed00000-fffffffffed00fff : SBA fffffffffed30000-fffffffffed30fff : lba fffffffffed32000-fffffffffed32fff : lba fffffffffed34000-fffffffffed34fff : lba fffffffffed36000-fffffffffed36fff : lba fffffffffed38000-fffffffffed38fff : lba fffffffffed3a000-fffffffffed3afff : lba fffffffffed3c000-fffffffffed3cfff : lba fffffffffed3e000-fffffffffed3efff : lba fffffffffff80000-fffffffffffaffff : Central Bus fffffffffffa0000-fffffffffffa0fff : CPU fffffffffffa6000-fffffffffffa6fff : CPU fffffffffffb0000-fffffffffffdffff : Local Broadcast fffffffffffe0000-ffffffffffffffff : Global Broadcast cat /proc/ioports 00000000-0000ffff : LBA I/O Port 00000040-0000007f : 0000:00:04.0 00000080-000000ff : 0000:00:00.0 00000080-000000ff : tulip 00000100-000001ff : 0000:00:01.0 00000100-000001ff : sym53c8xx 00000200-000002ff : 0000:00:01.1 00000200-000002ff : sym53c8xx 00000300-000003ff : 0000:00:02.0 00000300-000003ff : sym53c8xx 00000400-000004ff : 0000:00:02.1 00000400-000004ff : sym53c8xx 00000500-0000053f : 0000:00:05.0 00010000-0001ffff : LBA I/O Port 00020000-0002ffff : LBA I/O Port 00030000-0003ffff : LBA I/O Port 00040000-0004ffff : LBA I/O Port 00040000-0004007f : 0000:20:00.0 00040000-0004007f : tulip 00050000-0005ffff : LBA I/O Port 00060000-0006ffff : LBA I/O Port 00070000-0007ffff : LBA I/O Port