BOOT_ADMIN> boot lan Trying lan.000000-000000.0.0 Boot path initialized. Attempting to load IPL. Hard booted. palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002 Boot image contains: 0/vmlinux32 3985679 bytes @ 0x8000 0/vmlinux64 5275609 bytes @ 0x3d5800 0/ramdisk 2665562 bytes @ 0x8dd800 Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial). Command line for kernel: 'HOME=/ ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt102 palo_kernel=0/linux' Selected kernel: /linux from partition 0 Selected ramdisk: /ramdisk from partition 0 Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kernelELF32 executable Entry 001000d8 first 00100000 n 6 Segment 0 load 00100000 size 2202024 mediaptr 0x1000 Segment 1 load 0031a000 size 468144 mediaptr 0x21b000 Segment 2 load 00390000 size 257356 mediaptr 0x28e000 Segment 3 load 003d0000 size 8192 mediaptr 0x2cd000 Segment 4 load 003d8000 size 32768 mediaptr 0x2cf000 Segment 5 load 004020e4 size 112320 mediaptr 0x2d70e4 Loading ramdisk 2665562 bytes @ 05d64000... Branching to kernel entry point 0x001000d8. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.4.20-32 (root@mkhppa3) (gcc version 3.0.4) #1 Sat Mar 22 14:03:22 CET 2003 FP[0] enabled: Rev 1 Model 9 The 32-bit Kernel has started... Determining PDC firmware type: Snake. model 00004010 00000481 00000000 00000000 77ccf387 ffffffff 00000004 0000000a 0000000a vers 00000013 model 9000/745 Total Memory: 96 Mb initrd: 15d64000-15feec5a initrd: reserving 05d64000-05feec5a (mem_max 06000000) pagetable_init On node 0 totalpages: 24576 zone(0): 24576 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: HOME=/ ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt102 palo_kernel=0/linux Console: colour dummy device 160x64 Calibrating delay loop... 49.86 BogoMIPS Memory: 91264k available Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Searching for devices... Found devices: 1. Pace SGC Graphics (10) at 0xf4000000 [0], versions 0x10, 0x0, 0x77 2. Pace Core BA (11) at 0xf082f000 [2], versions 0x10, 0x0, 0x70 3. Pace Core SCSI (10) at 0xf0825000 [2/0/1], versions 0x10, 0x0, 0x71 4. Pace Core LAN (802.3) (10) at 0xf0826000 [2/0/2], versions 0x10, 0x0, 0x72 5. Pace Core HIL (10) at 0xf0821000 [2/0/3], versions 0x10, 0x0, 0x73 6. Pace Core RS-232 (10) at 0xf0823000 [2/0/4], versions 0x10, 0x0, 0x75 7. Pace Core RS-232 (10) at 0xf0822000 [2/0/5], versions 0x10, 0x0, 0x75 8. Pace Core Centronics (10) at 0xf0824000 [2/0/6], versions 0x10, 0x0, 0x74 9. Pace Core HPIB (10) at 0xf0835000 [2/0/7], versions 0x10, 0x0, 0x80 10. Pace Audio (10) at 0xf1000000 [2/0/8], versions 0x10, 0x0, 0x7e 11. Pace Core EISA (11) at 0xfc000000 [4], versions 0x10, 0x0, 0x76 12. Pace (745i, 747i) (0) at 0xfffbe000 [8], versions 0x401, 0x0, 0x4 13. Memory (1) at 0xfffbf000 [9], versions 0x20, 0x0, 0x9 CPU(s): 1 x PA7100 (PCX-T) at 50.000000 MHz Asp version 1 at 0xf082f000 found. LED (ASP-style) display at f0800020 registered Mongoose EISA Adapter found at 0xfc000000 EISA EEPROM at 0xf0810400 Enumerating EISA bus EISA slot 1: HWP0C70 EISA DMA 0 IRQ 3 EISA slot 2 a configured board was not detected ( expected ___FFFF) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Soft power switch support not available. Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport_init_chip: enhanced parport-modes not supported. parport0: PC-style at 0xf0824800, irq 88 [PCSPP] STI GSC/PCI graphics driver version 0.9 STI byte mode ROM at f4000000, hpa at f4000000 STI id 27f12392-40a00499, conforms to spec rev. 8.02 STI device: HPA1991AC19 Console: switching to colour frame buffer device 160x64 fb0: stifb 1280x1024-8 frame buffer device, id: 27f12392, mmio: 0xf4100000 pty: 256 Unix98 ptys configured PDC Software Console version 0.3 (2001-11-17), christoph.plattner@gmx.at Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xf0823800 (irq = 90) is a 16550A ttyS01 at iomem 0xf0822800 (irq = 89) is a 16550A lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.07 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Found i82596 at 0xf0826000, IRQ 87 82596.c: MAC of HP700 LAN read from EEPROM eth0: Couldn't get consistent shared memory eth0: 82596 at 0xf0826000, 08 00 09 78 F5 79 IRQ 87. 82596.c $Revision: 1.1 $ SCSI subsystem driver Revision: 1.00 3c700: consistent memory allocation failed 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi0: 53c700 rev 0 scsi0 : LASI SCSI 53c700 Vendor: TEAC Model: FC-1 HF 07 Rev: RV B Type: Direct-Access ANSI SCSI revision: 01 CCS Vendor: FUJITSU Model: M2694ES-512 Rev: 812A Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC= 4 ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. Partition check: sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table scsi0: (1:0) Enabling Tag Command Queuing SCSI device sdb: 2117025 512-byte hdwr sectors (1084 MB) sdb: unknown partition table harmony: no irq found usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice P SDC: HP SDC at 0xf0821000, IRQ 94 (NMI IRQ 93) HP SDC: New style SDC HP SDC: Revision: 1820-4784 HP SDC: TI SN76494 beeper present HP SDC: OKI MSM-58321 BBRTC present HP SDC: Spunking the self test register to force PUP on next firmware reset. HP SDC MLC: Registering the System Domain Controller's HIL MLC.